Cashmaster Sigma 105 User Manual download pdf (Page 6)

page 4

10228A

Guidelines

Unpacking

1. Unpack your Cashmaster machine and check that you have a

Cashmaster scale, a tray and a power adapter.

2. Fit the tray into the top of the Cashmaster scale. Push down

very rmly until it clicks into place.

(To remove the tray, hold Cashmaster machine rmly and twist the tray

until it clicks, then lift the tray from the base)

3. Plug the power adapter into the socket at the back of the

Cashmaster scale.

4. Place the Cashmaster scale on a rm even surface.

5. Ensure the tray is empty (the coin scoop/till cup should NOT be

placed on the tray before switching on).

6. Plug the power adapter into the power source.

7. The Cashmaster can now be operated from mains power or from

battery. When the battery is low the display will show

“low battery, recharge now”.

To fully charge the battery, plug the Cashmaster machine into the mains. The

LED on the front will show GREEN (for one second) then RED.

(A RED LED indicates that the battery is charging. The charging process can

take up to three hours. A GREEN LED indicates that the battery is fully charged

and the unit is connected to the external power supply. If the LED continous to

ash for more than 3 hours the battery may have a fault (in event of this, switch off

the power at the mains and contact Customer Support). No colour indicates that

the unit is running on its internal battery.)

Push down

VERY FIRMLY

until you hear

a click

1 2 3 4 5 6 7 8 9 10 11 ... 27 28

No comments

Cashmaster Sigma 105 User Manual Page 6